275585335478,
Cylinder Honing Tool
Cylinder Honing Tool
Cylinder Honing Tool
Cylinder Honing Tool
Cylinder Honing Tool
Cylinder Honing Tool

Cylinder Honing Tool

Regular price
$63.98
Regular price
$127.98
Sale price
$63.98
Unit price
per 
Availability
Sold out

Three-jaw Cylinder Sander suitable for degreasing engine cylinders with diameter 51-177mm. It is made up of high industrial quality of iron, so it has will not rust or corrode  easily to ensure long-service life and durable. Besides, it has ergonomic design, labor-saving and high work efficiency.

INSTALLATION STEPS

  1. Spray lubricant on the stone or the cylinder bores. Get hone set up on the drill

  2. Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second.
    Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins.

  3. After honing, use a paper towel to wipe out the inside of cylinder.

FEATURES

  • Collar prevent stone break
  • Main drive shaft is flexible 
  • Adjustable honing pressure
  • Easy to use and automatic centering 
  • Sleeve make cylinder insertion easy and protect stone when not in use 

SPECIFICATIONS

  • Dimension: 2 - 7inch (51 - 177mm)
  • Setting: 2 through 4 in & 4 through 7 in 
  • Stones: 3 - 220 Grit 
  • Length of stone: 7.63cm (3 inches
  • Height: 3 inch

PACKAGE INCLUDES

  • 1 X Three-jaw Cylinder Sander